Power Tools
Clear Flexible Dust Collection Hose
Available in 2-1/2 and 4 diameters and 10 foot lengths. Wire reinforced. One foot length available for short leads on power tools with hard to reach dust ports (4' diameter).
Metal Blast Gates
Heavy-duty construction is longer lasting and less likely to jam than plastic blast gates. Available with 4' or 2-1/2 diameter outlet openings.
Dust Collection Blast Gates
Controls flow of air in dust collection systems. Choose from 2-1/2' or 4' diameter outlet opening.
4 Clamped Quick Disconnect Fitting
For use with 4' hose and hose clamps (sold separately). Flared end allows you to quickly connect or disconnect any woodworking machine or fitting with a standard 4 port.
Steel Base Clamps
Available for both 2-1/2 and 4 hose. Comes in pack of 5. Use flat bladed screwdriver to tighten.
4 Spring Hose Clamp
1-3/4' long bolt tightens wire clamp into 4' dust collection hose. Yellow chromate finish. Comes in a pack of 5 clamps.
Dust Collection Floor Sweep
Use this floor sweep in conjunction with a blastgate in a dust collection system for cleaning up floor messes. Sweep is mounted stationary to floor with double faced tape. Dust is swept into opening in floor sweep with floor broom and then vacuumed away.
Hose Reducers
Attach two hose of different diameters together. A step down in size by a reducer increases air velocity near the machine where its needed most. Available in two sizes.Shop Vac Adapter works with 2-1/2' Hose.
Hose Adaptor
Lets you easily and securely hook up a 4' hose directly to tools with a standard 2-1/4' port. Works with most benchtop tools.Small end is 2-1/4' OD, 2' ID. Large end is 3-7/8'OD, 3-11/16' ID.
Universal Dust Port
This universal dust port easily attaches to shop machines such as router tables for connecting them to dust collection systems. 2-1/2' O.D. tapers to 2-5/16' I.D. and the 2-1/2' hose fits over this end. Flange end is 4' x 3-5/8' with four 3/16' mounting holes.